Page Comparison

...

1. Edit Video Component
2. Enter any video source and upload transcript from Basic Tab
3. Press Save
4. Edit Video Component and go to Advanced Tab
5. Empty the "Default Timed Transcript" 
6. Press Save

Expectation: ?
Actual: Uploaded transcript is removed.

...

1. Edit Video Component
2. Enter any video source and upload transcript from Basic Tab
3. Press Save
4. Enter another video source who already has 'en' transcript
5. Basic Tab should show "Timed Transcript Conflict"

...

Actual: User got to choose From 2 transcripts

...

1. Edit Video Component
2. Enter any video source and upload transcript from Basic Tab
3. Press Save
4. Edit Video Component and go to Advanced Tab
5. Enter a sub_id in "Default Timed Transcript" which has a transcript associated
6. Press Save

...

Actual: Transcript associated to that sub_id shows up on Video Component.

...

1. Edit Video Component
2. Enter 2 video sources and upload transcript from Basic Tab
3. Press Save
4. Edit Video Component and go to Advanced Tab
5. Note down "Default Timed Transcript" value (i.e. it should be ID of video source – which is added last)
6. Change "Default Timed Transcript" value to the other video source ID.
7. Press Save

Expectation: ?

Actual: Transcript with other source starts to show up on Video Component.

...

1. Edit Video Component
2. Enter 2 video sources and upload transcript from Basic Tab (it gets uploaded for the 2 sources)
3. Note the status "Timed Transcript Found"
4. Remove one of the sources from Basic Tab

Expectation: ?

Actual: Observe the status "Timed Transcript Found".

...

1. Edit Video Component
2. Go to Advanced Tab
3. Select language code from "Transcripts" field and upload a transcript for it
4. Press Save
5. Edit Video Component and go to Advanced tab
6. Delete the previously added transcript via "X" button
7. Save

...

Actual: Transcript is removed, and will not show up on video component

...