Page Comparison

...

Scenario # 4

keeping in mind the info from the top.

1. Edit Video Component
2. Enter 2 video sources and upload transcript from Basic Tab
3. Press Save
4. Edit Video Component and go to Advanced Tab
5. Note down "Default Timed Transcript" value (i.e. it should be ID of video source – which is added last)
6. Change "Default Timed Transcript" value to the other video source ID.
7. Press Save

...

Actual: Observe the status "Timed Transcript Found".

Scenario # 6

1. Edit Video Component
2. Go to Advanced Tab
3. Select language code from "Transcripts" field and upload a transcript for it
4. Press Save
5. Edit Video Component and go to Advanced tab
6. Delete the previously added transcript via "X" button
7. Save

Expectation:

Actual: Transcript is removed, and will not show up on video component

Scenario # 7

1. Edit Video Component
2. Go to Advanced Tab
3. Select language code from "Transcripts" field and upload a transcript for it
4. Press Save
5. Edit Video Component and go to Advanced tab
6. Replace the previously added transcript via "Replace" button
7. Save

Actual: Transcript is replaced/updated, and will show up on video component

Scenario # 8

1. Edit Video Component
2. Go to Advanced Tab
3. Select language code from "Transcripts" field and upload a transcript for it
4. Press Save
5. Edit Video Component and go to Advanced tab
6. Replace the previously added transcript via "Replace" button
7. Save

Actual: Transcript is replaced/updated, and will show up on video component