You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
« Previous
Version 37
Next »
MA-1099
-
Getting issue details...
STATUS
- /courses/(course_id)/
- /course_topics/(course_id)
- /threads/
- /threads/(thread_id)
- /comments
- /comments/(comment_id)
- GET not implemented
- PATCH
- DELETE
Using users with staff access was thrown into consideration as it would be make some of the permissions a bit more difficult for some discussion forums actions such as editing the body of a thread. Some tests were ran to see if there was a difference. No difference was found the tests that were designed to check for a difference.
Invalid: Old test that was invalid due to the way mongo is set up
Using 10 locust users with min/max time of 1000/2000ms, GET requests for sent for either a single thread or randomly from a selection of 10% of the threads in a course. This was tested against a sandbox.
- It seems like getting a random thread vs. the same thread does not make a reliably noticeable difference.
- As number of posts in the database increase, the response time also increases.
- Number of posts in a course does not seem to be matter for GETting a post.
Update: This conclusion is invalid as the sandbox does not have the proper indexes.
| Approx Total Posts | Name | # requests | # fails | Median | Average | Min | Max | Content Size | # reqs/sec |
| 1000 | GET a random Thread out of 1000 Posts | 2671 | 0 | 140 | 150 | 125.5698204 | 410.5699062 | 1178 | 5.8 |
| 1000 | GET a single Thread out of 1000 Posts | 2262 | 0 | 140 | 151 | 126.8491745 | 337.1069431 | 1178 | 5.9 |
| 11000 | GET a random Thread out of 10000 Posts | 1522 | 0 | 180 | 196 | 164.470911 | 447.6130009 | 1178 | 6 |
| 11000 | GET a single Thread out of 10000 Posts | 1593 | 0 | 180 | 198 | 164.4868851 | 480.9308052 | 1178 | 5.8 |
| 11100 | GET a random Thread out of 100 Posts | 542 | 0 | 180 | 193 | 164.2448902 | 419.1830158 | 1178 | 5.9 |
| 11100 | GET a single Thread out of 100 Posts | 738 | 0 | 180 | 199 | 165.0490761 | 434.2639446 | 1178 | 6 |
| 12100 | GET a random Thread out of 1000 Posts | 683 | 0 | 180 | 204 | 166.1930084 | 489.5379543 | 1178 | 5.6 |
| 12100 | GET a single Thread out of 1000 Posts | 1049 | 0 | 180 | 202 | 169.2481041 | 443.4149265 | 1178 | 6 |
| 13100 | GET a random Thread out of 1000 Posts | 1473 | 0 | 180 | 209 | 171.4019775 | 1157.299042 | 1178 | 6.1 |
| 13100 | GET a single Thread out of 1000 Posts | 1317 | 0 | 180 | 204 | 170.7370281 | 510.4939938 | 1178 | 5.8 |
| 14100 | GET a random Thread out of 1000 Posts | 855 | 0 | 190 | 209 | 175.9641171 | 468.7230587 | 1178 | 6 |
| 14100 | GET a single Thread out of 1000 Posts | 7557 | 0 | 190 | 213 | 173.609972 | 1970.304012 | 1178 | 5.1 |
POST:
Missing some data: After 1,000,000 posts in 24 hours, the response time remain constant.
Unfortunately locust ran into a calculation error when running a post test so there is no table data. After 1,000,000 posts in 24 hours, the response time remain constant. This was tested against https://courses-loadtest.edx.org/
Waiting on Loadtest env to get meaningful results.
Patch events for the boolean values took more or less the same amount of time.
This was tested against a t2.large sandbox.
| Type | Name | # requests | # fails | Median | Average | Min | Max | Content Size | # reqs/sec |
| PATCH | abuse_flagged | 1814 | 0 | 300 | 315 | 96.83394432 | 1307.781935 | 2009 | 2.5 |
| PATCH | following | 1847 | 0 | 300 | 314 | 97.83601761 | 1730.396986 | 1939 | 1.9 |
| PATCH | voted | 1875 | 0 | 310 | 319 | 97.41687775 | 1427.90103 | 2104 | 1.3 |
Patch events for being a Staff vs. Non-staff user did not make a difference.
Using 2 locust user intentionally split between staff and non-staff tasks, PATCH requests were sent with a 500ms wait time. This was tested against a t2.large sandbox.
| Name | reqs | # | fails | Avg | Min | Max | Median | req/s |
| PATCH | abuse_flag_thread | 33 | 0(0.00%) | 332 | 244 | 470 | 330 | 0 |
| PATCH | following_thread | 120 | 0(0.00%) | 326 | 241 | 456 | 330 | 0.2 |
| PATCH | staff_abuse_flag_thread | 40 | 0(0.00%) | 320 | 240 | 402 | 330 | 0 |
| PATCH | staff_following_thread | 110 | 0(0.00%) | 333 | 239 | 482 | 330 | 0 |
| PATCH | staff_vote_on_thread | 1774 | 0(0.00%) | 339 | 229 | 17607 | 330 | 1.1 |
| PATCH | vote_on_thread | 1787 | 0(0.00%) | 331 | 226 | 14599 | 330 | 1 |
Different body sized edits did not seem to make a difference in response times.
| Name | reqs | # | fails | Avg | Min | Max | Median | req/s |
|---|
| PATCH | abuse_flag_thread | 16 | 0(0.00%) | 162 | 117 | 212 | 150 | 0 |
| PATCH | edit_thread_with_10000char | 50 | 0(0.00%) | 199 | 151 | 424 | 190 | 0.1 |
| PATCH | edit_thread_with_1000char | 61 | 0(0.00%) | 234 | 138 | 3707 | 170 | 0.1 |
| PATCH | edit_thread_with_250char | 54 | 0(0.00%) | 178 | 136 | 422 | 160 | 0.1 |
| PATCH | edit_thread_with_4char | 57 | 0(0.00%) | 183 | 138 | 331 | 170 | 0.1 |
| PATCH | edit_thread_with_5000char | 57 | 0(0.00%) | 188 | 141 | 341 | 180 | 0.1 |
| PATCH | following_thread | 42 | 0(0.00%) | 168 | 130 | 337 | 160 | 0.2 |
| PATCH | vote_on_thread | 698 | 0(0.00%) | 160 | 114 | 652 | 150 | 1.1 |
DELETE will be best tested with the other endpoints
For every DELETE thread, we POST a Thread and then GET a thread from the thread pool. This was tested against a t2.large.sandbox.
| Name | reqs | # | fails | Avg | Min | Max | Median | req/s |
|---|
| DELETE | DELETE_thread | 305 | 1(0.33%) | 203 | 137 | 352 | 190 | 3 |
| GET | GET_thread_list | 306 | 0(0.00%) | 190 | 154 | 420 | 170 | 2.9 |
| POST | POST_thread | 306 | 0(0.00%) | 127 | 102 | 277 | 110 | 3 |
mark_as_read and page did not seem to affect the response time at all.
Using 10 locust users with min/max time of 1000/2000ms, GET requests for sent for 1 of 10 threads with 100 responses in increasing increments of 100 responses, each with single comment. The page_size seemed to be the parameter that affected the response time. This was tested against a t2.large sandbox.
| Type | Name | # requests | # fails | Median | Average | Min | Max | Content Size | # reqs/sec |
| GET | page_size=100 | 552 | 0 | 1200 | 1212 | 689.6290779 | 2079.323053 | 167747 | 0.6 |
| GET | page_size=75 | 588 | 0 | 1000 | 1053 | 570.6920624 | 1957.83782 | 125858 | 0.7 |
| GET | page_size=50 | 552 | 0 | 900 | 927 | 459.9750042 | 1813.49206 | 83958 | 1.1 |
| GET | page_size=25 | 525 | 0 | 790 | 810 | 345.9990025 | 1692.13295 | 42058 | 1 |
| GET | page_size=1 | 557 | 0 | 680 | 710 | 237.9820347 | 1673.289061 | 1833 | 0.8 |
None of the parameters affect the response time. As comments on a response increases, so does the response time.
Using 10 locust users with min/max time of 1000/2000ms, GET requests for sent for 1 of 10 threads with 1 response with comments increasing in increments of 50. This was tested against a t2.large sandbox.
| Type | Name | # requests | # fails | Median | Average | Min | Max | Content Size | # reqs/sec |
| GET | comments=500 | 352 | 0 | 1700 | 1822 | 1361.582041 | 3062.257051 | 406832 | 0.1 |
| GET | comments=450 | 395 | 0 | 1600 | 1710 | 1244.348049 | 3462.92305 | 366232 | 0.3 |
| GET | comments=400 | 387 | 0 | 1400 | 1552 | 1093.059063 | 4270.447969 | 325632 | 0.1 |
| GET | comments=350 | 394 | 0 | 1300 | 1394 | 972.3510742 | 2612.555027 | 285032 | 0.4 |
| GET | comments=300 | 379 | 0 | 1100 | 1233 | 827.7709484 | 2370.13793 | 244432 | 0.2 |
| GET | comments=250 | 353 | 0 | 970 | 1056 | 708.3749771 | 2795.8529 | 203832 | 0 |
| GET | comments=200 | 352 | 0 | 830 | 943 | 583.6598873 | 2230.697155 | 163232 | 0.1 |
| GET | comments=150 | 368 | 0 | 680 | 785 | 441.0719872 | 2042.181969 | 122632 | 0.2 |
| GET | comments=100 | 342 | 0 | 540 | 658 | 323.1511116 | 1866.328001 | 82032 | 0.2 |
| GET | comments=50 | 390 | 0 | 390 | 512 | 194.7860718 | 2818.300009 | 41432 | 0.3 |
POST should be similar to POSTing threads.
DELETE:
DELETE is best tested with the other endpoints. For every comment delete, we POST a thread, GET a random thread, and then DELETE that random thread.